17.05.2023 16:04
Drinking water is the most basic need of the human body. In order to meet this need in the most correct way, the quality of drinking water is of particular importance. With information to help you choose between dozens of water brands and different water filters, you can more easily decide on the ideal drinking water for you.
Water quality expresses its chemical, physical, biological and radiological properties. In general, many standard references can be obtained and used against which compliance with water treatment can be evaluated. The most common standards used to assess water quality relate to the health of ecosystems, the safety of human contact, and drinking water.
We would not be wrong if we say that water, which we should consume at least 2 liters every day, is our source of life. However, the consumed drinking water can cause many diseases. Considering that there are many brands of water in the sector, people may find it difficult to decide which brand of water to buy.
Drinking water is checked by passing certain tests. In particular, it must undergo some chemical tests such as heavy metal determination, nitrite or nitrate determination, general hardness, and some physical tests such as turbidity, smell, and taste.
Apart from these, other important tests are microbiological tests. Microbiological tests mean Escherichia coli, Coliform bacteria, Salmonella spp., Pseudomonas aeruginosa, Clostridium perfringens, Counting of Fecal Enterococci main microorganisms.
When it comes to determining whether the water we buy meets the standards or not, you can find certificates and some other documents on many sites during your internet research. But many of these are not reliable documents.
However, water companies can share with people the tests they have to do at certain intervals. You can get the measurements and results of the water you use regularly from their website.
Water testing laboratories are laboratories where water samples are analyzed and the substances inside are determined. The analysis of drinking and usable water is carried out in the initial stages in order to protect the health of employees. Drinking water analysis may be required by an occupational physician and occupational safety specialist based on occupational health and safety.
As Shirinsu, we always use water quality analysis techniques with advanced technologies to analyze the water quality and usage level according to the hydrological cycle, distribution system, urban network and underground resources. After going through all the stages necessary to determine the properties of chlorine, fluorine and minerals in water, the water we present to you is always different from others.
The water should definitely contain fluorine and calcium minerals. However, water is highly sensitive and can also become a big problem that will have a negative impact on human health. Although the soil takes over the filter work at this stage when the water is in contact with the earth, various mineral salts and chemical cycles can lower the quality of the water.
If you want to check the quality of your drinking water at home, the first step is to get a test sample. The test pattern you want depends on the source of the water you want to test. So if you want to test the drinking water in your area, you’ll need a basic sample that contains a contaminant like chlorine. If you want to test your well water, you will need a water quality test that is larger and includes an insecticide.
Test samples are the most common method of testing water quality because they are affordable and easy to use. Although the instructions vary from model to model, it roughly goes like this:
Fill a test container with a water sample and put a test sample in it, turn the container and wait a few minutes while the test sample is inside the water sample. Then remove the test sample from the water and compare the color changes with the streaked lines on the test to a color chart on the test.
As for powder samples to measure bacteria, this water test sample has you add a few drops of water to the powder, shake it a few times, and then compare the colors to the container until you find an even match. These samples are known to have better accuracy than test lines for certain types of contaminants such as bacteria. When looking for a sample like this, try to find samples where you can at least get information about the following: PH level; chlorine; Nitrates; Nitrites; Bacteria. Don’t waste time ordering quality water: https://shirinsu.az/en/products
